After all preparations before the sample into the oven, and turn on the power and then connect the red indicator light that has been heated box. When the temperature reaches the control temperature, the red light is off the green light to start the thermostat. To prevent failure of the thermostat, you must take care of. 5. Add the test should not be too close attention to the arrangement. Cooling board should put the sample in order to avoid the impact on the flow of heat flow. Baking prohibited flammable, explosive, volatile and corrosive materials. 6. When the required sample observation room, the door can be opened heretics, observed through the glass door. (4) open at the top or bottom of the tank vent to exclude moisture. (5) The maximum average test load of steel 15Kg Digital blast oven, do not place too heavy, too close, be sure to leave gaps, can not be placed on the studio floor test. Within (6) into the oven non flammable, volatile items oven temperature to prevent an explosion. (7) through the power, the green indicator light, open blast switch, blower motor is running, open the heating power, namely the oven into operation. (8) work, not often open the door, so as not to affect the constant temperature field. (9) The equipment without over-temperature protection device hot air circulation oven, it should have someone monitoring the temperature inside the work, once the temperature out of control, power outages should be checked in order to avoid accidents. Ovens, Longkou laboratory furnace (certified), oven experiment by Longkou Furnace. Longkou experiment Furnace (www.lk-dianlu.com) is a leader in Yantai, Shandong Province, electric equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Longkou laboratory furnace leadership with the staff warmly welcome all inquiries negotiations to create experimental furnace Longkou a better future.